This super-slim water butt fits in the tightest of spaces and allows you to collect lots of naturally soft rainwater for your garden. Rotationally moulded for strength and durability, it has an average wall thickness of 6-7mm, is guaranteed frostproof and is fully recyclable. Position it wherever it is required and then drill a hole for the rainwater diverter about 4cm down from the top of the tank.
Height | 1000mm |
---|---|
Length | 1240mm |
Width | 345mm |
Weight | 20kg |
Outlets | 1" BSP |
Lid / Access | 9'' Vented |
Capacity | 400 Litres |
Material | MDPE |
To collect rainwater, you will need a water butt connected to a downpipe via rainwater diverter.
All Ecosure water butts are manufactured from high quality Medium Density Polythylene (MDPE). This strong durable material is weather and impact resistant.
You can install a diverter anywhere on our water butts. We would recommend near the top but not too near the corners
We manufacture a range of water tanks specifically design to be installed underground. Available in non-potable and potable versions.
Each water butt has brass outlet moulded into them during the manufacturing process. This outlet can be used to attached a tap or shut off valve.
Most come fitted with a 9'' vented lid or 14'' or 16'' for our larger versions. We also produce a range of Wall Mounted Water Butts which have smaller lids.
Online purchases may be returned via a major parcel carrier. Read our full returns policy.