About the 10,000 litre water tank
Perfect for commercial and agricultural usage, this massive 10,000 litre water tank is ideal for non potable water storage.
On top of the tank are four possible in/out lets for you to connect your pipe work to. To allow you to connect large pipe our pipe connection places will allow sizes up to 4".
Access into the tank can be made via the 600mm vented lid on the top of the tank. This access can be used for any general maintenance required.
Tank notes
Please ensure that the Installation Guidelines have been read and understood before commencing installation
Only lift when empty
This tank must be fully encased in concrete
Designed to take pedestrian traffic only; if required to carry vehicular traffic, a structural engineer's design is required
Top of the tank must not finish any more than 500mm below ground level
Without a structural engineer's design, tank must not be located adjacent to foundations, raised banks, patios or walls
Pipe-falls should be a minimum of 2:100 in the direction of water-flow, i.e. rainwater pipe and service duct towards the tank and the overflow away from the tankWater Tank Advantages:
- Free of maintenance
- Resistant from corrosion
- Strong and durable
- 600mm Access
- No Outlet (Unless Specified - Outlet Sizes upto 8")
10,000 Litre water tank details
| Dimensions |
H:2370mm x Dia:2700mm |
| Outlet |
Upto 8" |
| Weight |
180kg |
| Access |
600mm |
| Actual Capacity |
12,000 litres / 2640 gal |
