About the 15,000 litre underground potable water tank
Perfect for commercial and agricultural usage, this massive 15,000 litre underground water tank is ideal for potable water storage. Manufactured using WRAS Approved polyethylene Icorene 1314 DW Black 9001 or Revolve N-748 Black approved under WRAS Approval 1202543 and 1201523 respectively.
On top of the tank are four possible in/out lets for you to connect your pipe work to. To allow you to connect large pipe our pipe connection places will allow sizes up to 4".
Access into the tank can be made via the 600mm vented lid on the top of the tank. This access can be used for any general maintenance required.
Tank notes
- Please ensure that the Installation Guidelines have been read and understood before commencing installation
- Only lift when empty
- This tank must be fully encased in concrete
- Designed to take pedestrian traffic only; if required to carry vehicular traffic, a structural engineer's design is required
- Top of the tank must not finish any more than 500mm below ground level
- Without a structural engineer's design, tank must not be located adjacent to foundations, raised banks, patios or walls
- Pipe-falls should be a minimum of 2:100 in the direction of water-flow, i.e. rainwater pipe and service duct towards the tank and the overflow away from the tank
15,000 Litre Water Tank Dimensions
| Height |
2900mm |
| Diameter |
2700mm |
| Inlet |
Upto 6" |
| Outlet |
Upto 6" |
| Weight |
360kg |
| Access |
600mm |
| Capacity |
15,000 litres / 3300 gallon |
| Material |
WRAS Approved Polyethylene |
